Angry Ass | Fan Clutch and Tensioner Combination Wrench 32/19

from $31.69

We got tired of the generic plate wrenches and decided to do it better. We based the design on a 32mm wrench to help with removal of the fan clutch on cars with viscous fans along with a 3/8 breaker bar location for extra torque for those stubborn ones. On the opposite end we took advantage of the thin size to add a 19mm wrench to get in those tight spots for the tensioner walker nuts on v-belt cars and we made sure to not waste any space by including a bottle opener to keep you hydrated.

Oh and we laser etched stuff all over it because we think we’re clever and because lets be honest, we got to play with a laser.

As an option add in our Water Pump Holding Wrench, to save some money on both.

Water Pump Holding Wrench:
Quantity:
Add To Cart

We got tired of the generic plate wrenches and decided to do it better. We based the design on a 32mm wrench to help with removal of the fan clutch on cars with viscous fans along with a 3/8 breaker bar location for extra torque for those stubborn ones. On the opposite end we took advantage of the thin size to add a 19mm wrench to get in those tight spots for the tensioner walker nuts on v-belt cars and we made sure to not waste any space by including a bottle opener to keep you hydrated.

Oh and we laser etched stuff all over it because we think we’re clever and because lets be honest, we got to play with a laser.

As an option add in our Water Pump Holding Wrench, to save some money on both.

We got tired of the generic plate wrenches and decided to do it better. We based the design on a 32mm wrench to help with removal of the fan clutch on cars with viscous fans along with a 3/8 breaker bar location for extra torque for those stubborn ones. On the opposite end we took advantage of the thin size to add a 19mm wrench to get in those tight spots for the tensioner walker nuts on v-belt cars and we made sure to not waste any space by including a bottle opener to keep you hydrated.

Oh and we laser etched stuff all over it because we think we’re clever and because lets be honest, we got to play with a laser.

As an option add in our Water Pump Holding Wrench, to save some money on both.

Additional Information

  • CNC Laser Cut from 304 stainless steel in USA

  • Laser etched because we’re helpful

  • 32mm/19mm wrench areas with 3/8” breaker bar drive recess and integral bottle opener

AP Racing | Radi-Cal™ Brake Fluid | R1
$17.95
Holy Grail Labs | Blade Fuse Box Upgrade Kit
$219.00
AP Racing | Radi-Cal™ Brake Fluid | Factory R
$12.95
Angry Ass | S38B36 + B38 Valve Cover Gasket Set
$49.96
Sold out. Select your options and leave your email below and we will notify you when we are restocked.
Angry Ass | M30 + S38 Clutch Alignment Tool
$10.00