Holy Grail Labs | M30B35 Intake Manifold Bracket

$49.99

The Holy Grail Labs | M30B35 Intake Manifold Bracket ensures the B35 intake manifold is properly supported when doing an M30B35 swap into a E28.

The stock M30B34 intake manifold is supported by two struts that bolt to the valve cover and a small bracket between the block and the bottom of the manifold. The M30B35 does not have those ugly struts above and is instead supported by a beefy aluminum bracket connected to the engine mount. Unfortunately the shape of the E28 engine mount prevents the aluminum M30B35 bracket from fitting. The Holy Grail Labs | M30B35 Intake Manifold Bracket is a simple, robust, solution to this problem.

Quantity:
Add To Cart

The Holy Grail Labs | M30B35 Intake Manifold Bracket ensures the B35 intake manifold is properly supported when doing an M30B35 swap into a E28.

The stock M30B34 intake manifold is supported by two struts that bolt to the valve cover and a small bracket between the block and the bottom of the manifold. The M30B35 does not have those ugly struts above and is instead supported by a beefy aluminum bracket connected to the engine mount. Unfortunately the shape of the E28 engine mount prevents the aluminum M30B35 bracket from fitting. The Holy Grail Labs | M30B35 Intake Manifold Bracket is a simple, robust, solution to this problem.

The Holy Grail Labs | M30B35 Intake Manifold Bracket ensures the B35 intake manifold is properly supported when doing an M30B35 swap into a E28.

The stock M30B34 intake manifold is supported by two struts that bolt to the valve cover and a small bracket between the block and the bottom of the manifold. The M30B35 does not have those ugly struts above and is instead supported by a beefy aluminum bracket connected to the engine mount. Unfortunately the shape of the E28 engine mount prevents the aluminum M30B35 bracket from fitting. The Holy Grail Labs | M30B35 Intake Manifold Bracket is a simple, robust, solution to this problem.

Additional Information

  • Made out of 3.4mm/0.135" thick cold rolled steel

  • Powder-coated matte black in Black Magic from Axalta

  • Uses original hardware from M30B35 to install

  • Made in the USA

  • NOTE: This bracket will NOT fit doing an M30B35 manifold swap on a M30B34 engine. This bracket was designed for swapping an entire M30B35 engine into the E28 chassis, as the E28 motor mounting provisions are different, not allowing the original M30B35 aluminum support bracket to bolt up in the E28. This bracket is solely designed to replace the aluminum bracket that is no longer usable.

Angry Ass | M88 + S38B35, B36, B38 Head Oil Return Seal Kit
$29.89
Ivo Christov | Batteryless SI Board
$152.42
Sold out. Select your options and leave your email below and we will notify you when we are restocked.
Angry Ass | Throttle and Cruise Control Cable Bushings
from $11.12
sale
AP Racing | Radi-Cal™ Brake Fluid | R2
$19.95
Leo Grande Racing | Stainless Steel Clutch Fork Pivot Pin
from $37.00
sale