Stim Tech | Trailing Arm Reinforcement Gusset
Stim Tech rear trailing arm gussets are a weld in part designed to reinforce the damper attachment point and hub body on the factory rear trailing arms. Ideal for those looking to run true coilovers, race dampers or to simply increase the rigidity of their factory arms.
Gussets are perfectly tailored to fit the geometry of the factory arms, meaning the gussets require no modification prior to welding in place.
NOTE: Sold as a set of two.
ATTENTION: These reinforcement gussets must be installed by a competent fabricator. All areas where the reinforcements meet the trailing arms must be prepared properly prior to welding. It is up to the fabricator/installer to verify that any chassis modifications made meet the regulations of any event rule book the vehicle may be subject to.
Stim Tech rear trailing arm gussets are a weld in part designed to reinforce the damper attachment point and hub body on the factory rear trailing arms. Ideal for those looking to run true coilovers, race dampers or to simply increase the rigidity of their factory arms.
Gussets are perfectly tailored to fit the geometry of the factory arms, meaning the gussets require no modification prior to welding in place.
NOTE: Sold as a set of two.
ATTENTION: These reinforcement gussets must be installed by a competent fabricator. All areas where the reinforcements meet the trailing arms must be prepared properly prior to welding. It is up to the fabricator/installer to verify that any chassis modifications made meet the regulations of any event rule book the vehicle may be subject to.
Stim Tech rear trailing arm gussets are a weld in part designed to reinforce the damper attachment point and hub body on the factory rear trailing arms. Ideal for those looking to run true coilovers, race dampers or to simply increase the rigidity of their factory arms.
Gussets are perfectly tailored to fit the geometry of the factory arms, meaning the gussets require no modification prior to welding in place.
NOTE: Sold as a set of two.
ATTENTION: These reinforcement gussets must be installed by a competent fabricator. All areas where the reinforcements meet the trailing arms must be prepared properly prior to welding. It is up to the fabricator/installer to verify that any chassis modifications made meet the regulations of any event rule book the vehicle may be subject to.
Additional Information
Manufactured from .120” mild steel that is CNC laser cut and then CNC formed to exact dimensions
Made in Canada by Stim Tech